Data Record
|
0
|
zero_doppler_time
Zero doppler time
at which Summary Quality
information applies |
MJD |
1 |
mjd |
12 byte(s) |
1
|
attach_flag
Attachment Flag
Set to 1 if all MDSRs
corresponding to this ADSR
are blank, set to zero
otherwise. This flag will
always be zero because this
ADSR is updated
once per slice or scene.
Therefore, if there are no
MDSRs, this ADSR is not
produced at all.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
2
|
input_mean_flag
Input data mean
outside nominal range flag
0 = mean of I and Q input
values are both within
specified range from
expected mean. For expected
mean of x, the measured mean
must fall between
x-threshold to x+threshold.
1 = otherwise
|
flag |
1 |
BooleanFlag |
1 byte(s) |
3
|
input_std_dev_flag
Input data
standard deviation outside
nominal range flag
0 = standard deviation
values of I and Q input
values are both within
specified range of expected
standard deviation. For
expected std. dev.
x, the measured std. dev.
must fall between
x-threshold to x+threshold.
1 = otherwise
|
flag |
1 |
BooleanFlag |
1 byte(s) |
4
|
input_gaps_flag
Significant gaps
in the input data flag
0 = number of input gaps
<= threshold value 1 =
number of input data gaps
> threshold value.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
5
|
input_missing_lines_flag
Missing lines
significant flag
0 = percentage of missing
lines <= threshold value
1 = percentage of missing
lines > threshold value.
The number of missing
lines is the number of lines
missing from the input data,
excluding data gaps.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
6
|
dop_cen_flag
Doppler Centroid
Uncertain flag 0 =
confidence measure >=
specified value 1 =
confidence measure <
specified value. If more
than one Doppler centroid
estimation is performed in a
slice, the flag is set if
any confidence measure is
less than the threshold.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
7
|
dop_amb_flag
Doppler
ambiguity estimate uncertain
flag 0 =
confidence measure >=
specified value 1 =
confidence measure <
specified value
|
flag |
1 |
BooleanFlag |
1 byte(s) |
8
|
output_mean_flag
Output data mean
outside nominal range flag
0 = mean of I and Q
output values for SLC image
or mean of detected pixels
for a detected product, are
both within specified range
from expected mean. For
expected mean of x, the
measured mean must fall
between x-threshold to
x+threshold. 1= otherwise.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
9
|
output_std_dev_flag
Output data
standard deviation outside
nominal range flag
0 = mean of I and Q
output values for SLC image
or mean of detected pixels
for a detected product, are
both within specified range
from expected mean. For
expected mean of x, the
measured mean must fall
between x-threshold to
x+threshold. 1 = otherwise
|
flag |
1 |
BooleanFlag |
1 byte(s) |
10
|
chirp_flag
Chirp extraction
failed or is of low quality flag
0 = able to reconstruct
all chirps or chirp
reconstruction not requested
(nominal chirp used) AND all
quality measures were
acceptable. 1 = unable to
reconstruct a chirp during
processing and chirp
reconstruction was requested
or the quality is below the
acceptable levels. When
value = 1, (i.e. unable to
reconstruct a chirp during
processing and chirp
reconstruction was requested
or the quality is
below the acceptable
levels), PF-ASAR uses the
nominal range pulse for
processing and a nominal
elevation beam scaling factor.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
11
|
missing_data_sets_flag
Data sets
missing flag 0 =
all data sets which are
supposed to be in the
product are present 1 = any
data sets (including ADSs)
are missing from the
product which are supposed
to be included under normal
circumstances. When value =
1 (i.e any data sets,
including ADSs, are missing
from the product which are
supposed to be included
under normal circumstances),
which data sets are missing
can be determined by an
examination of the DSDs in
the SPH.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
12
|
invalid_downlink_flag
Invalid downlink
parameters flag 0
= all parameters read from
the downlinked data were
valid 1 = displayed if any
downlink parameter is out of
range and therefore
a default value has been
used during processing.
|
flag |
1 |
BooleanFlag |
1 byte(s) |
13
|
spare_1
Spare |
- |
1 |
SpareField |
7 byte(s) |
14
|
thresh_chirp_broadening
Threshold for
setting the chirp quality flag.
Maximum percentage
broadening permitted in
cross-correlation pulse
width compared to
theoretical width.
|
% |
1 |
fl |
4 byte(s) |
15
|
thresh_chirp_sidelobe
Threshold for
setting the chirp quality flag
First sidelobe of the
chirp cross correlation function
|
dB |
1 |
fl |
4 byte(s) |
16
|
thresh_chirp_islr
Threshold for
setting the chirp quality flag
ISLR of the chirp cross
correlation function
|
dB |
1 |
fl |
4 byte(s) |
17
|
thresh_input_mean
Threshold for
setting the mean of input data
quality flag For
an expected mean value of x,
this is the value T, such
that the measured mean must
fall between the x-T and x+T.
|
- |
1 |
fl |
4 byte(s) |
18
|
exp_input_mean
Expected mean
input value for this product for
both I and Q. |
- |
1 |
fl |
4 byte(s) |
19
|
thresh_input_std_dev
Threshold for
setting the standard deviation
of input data quality flag
For an expected standard
deviation value of y, this
is the value D, such that
the measured standard
deviation must fall between
the y-D and y+D.
|
- |
1 |
fl |
4 byte(s) |
20
|
exp_input_std_dev
Expected input
std. dev. for this product for
both I and Q. |
- |
1 |
fl |
4 byte(s) |
21
|
thresh_dop_cen
Threshold for
setting the Doppler Centroid
quality flag
Threshold for Doppler
Centroid confidence
|
- |
1 |
fl |
4 byte(s) |
22
|
thresh_dop_amb
Threshold for
setting the Doppler Centroid
ambiguity quality flag
Threshold for setting the
Doppler Centroid ambiguity
confidence flag
|
- |
1 |
fl |
4 byte(s) |
23
|
thresh_output_mean
Threshold for
setting the mean of output data
quality flag For
an expected mean value of x,
this is the value T, such
that the measured mean must
fall between the x-T and x+T.
|
- |
1 |
fl |
4 byte(s) |
24
|
exp_output_mean
Expected mean
output value for this product.
For an SLC product this is the
expected mean of both the I and
Q values. |
- |
1 |
fl |
4 byte(s) |
25
|
thresh_output_std_dev
Threshold for
setting the standard deviation
of output data quality flag
For an expected standard
deviation value of y, this
is the value D, such that
the measured standard
deviation must fall between
the y-D and y+D.
|
- |
1 |
fl |
4 byte(s) |
26
|
exp_output_std_dev
Expected output
std. dev. for this product. For
an SLC product this is the
expected output std. dev. for
both I and Q values. |
- |
1 |
fl |
4 byte(s) |
27
|
thresh_input_missing_lines
Threshold for
setting the missing lines
quality flag
Maximum percentage of
missing lines to total lines.
|
% |
1 |
fl |
4 byte(s) |
28
|
thresh_input_gaps
Threshold for
setting the missing gaps quality
flag Maximum
number of missing gaps allowed.
|
- |
1 |
fl |
4 byte(s) |
29
|
lines_per_gaps
Number of missing
lines which constitute a gap |
lines |
1 |
ul |
4 byte(s) |
30
|
spare_2
Spare |
- |
1 |
SpareField |
15 byte(s) |
31
|
input_mean
Input data mean
I channel, Q channel
|
- |
2 |
fl |
2*4 byte(s) |
32
|
input_std_dev
Input data
standard deviation
I channel, Q channel
|
- |
2 |
fl |
2*4 byte(s) |
33
|
num_gaps
Number of gaps
Composed of a
predetermined number of
consecutive missing lines
|
- |
1 |
fl |
4 byte(s) |
34
|
num_missing_lines
Number of
missing lines
Excluding gaps
|
- |
1 |
fl |
4 byte(s) |
35
|
output_mean
Output data mean
For SLC products, first
value is for the I channel,
second is for the Q channel.
For detected products,
second value is set to zero
|
- |
2 |
fl |
2*4 byte(s) |
36
|
output_std_dev
Output data
standard deviation
For SLC products, first
value is for the I channel,
second is for the Q channel.
For detected products,
second value is set to zero
|
- |
2 |
fl |
2*4 byte(s) |
37
|
tot_errors
Total number of
errors detected in isp headers |
- |
1 |
ul |
4 byte(s) |
38
|
Spare_3
Spare |
- |
1 |
SpareField |
16 byte(s) |